Difference between revisions of "Mono"

Line 33: Line 33:
 
apt-get install -f</source>
 
apt-get install -f</source>
  
== Build from Source ==
+
== Build from Source (Optional) ==
 +
 
 
The following Mono components are required by TCAdmin.
 
The following Mono components are required by TCAdmin.
 
* libgdiplus
 
* libgdiplus

Revision as of 21:23, 22 July 2012

Pre-compiled Packages

CentOS 5/6 / Fedora 15 / Redhat 5

32 bit

wget http://www.tcadmin.com/installer/mono-2.10.8-bi.i386.rpm 
yum install mono-2.10.8-bi.i386.rpm --nogpgcheck

64 bit

NOTE: CentOS 6.0 64bit needs to be configured with Mono 32bit. Use the commands above.

wget http://www.tcadmin.com/installer/mono-2.10.8-bi.x86_64.rpm 
yum install mono-2.10.8-bi.x86_64.rpm --nogpgcheck

Debian 6

32 bit

wget http://www.tcadmin.com/installer/mono-2.10.8-bi.i386.deb
apt-get update
dpkg -i mono-2.10.8-bi.i386.deb
apt-get install -f

64 bit

wget http://www.tcadmin.com/installer/mono-2.10.8-bi.x86_64.deb
apt-get update
dpkg -i mono-2.10.8-bi.x86_64.deb
apt-get install -f

Ubuntu 10/11/12

32 bit

wget http://www.tcadmin.com/installer/mono-2.10.8-ubu.i386.deb
apt-get update
dpkg -i mono-2.10.8-ubu.i386.deb
apt-get install -f

64 bit

wget http://www.tcadmin.com/installer/mono-2.10.8-ubu.x86_64.deb
apt-get update
dpkg -i mono-2.10.8-ubu.x86_64.deb
apt-get install -f

Build from Source (Optional)

The following Mono components are required by TCAdmin.

  • libgdiplus
  • mono
  • mono-basic
  • xsp

When using the commands below replace 2.10.8 with the version you are building.

Install any missing dependencies shown by the configure command before running make.

Install Requirements

CentOS

yum install make glib2-devel libpng-devel libjpeg-devel giflib-devel libtiff-devel libX11-devel gcc-c++ fontconfig-devel bison gettext bzip2 libtool automake autoconf wget

Debian

apt-get install make pkg-config libglib2.0-dev libglib2.0-dev libpng12-dev libjpeg62-dev libgif-dev libX11-dev libfontconfig1-dev libfreetype6-dev bison g++ gettext libtool

Ubuntu

apt-get install gcc build-essential pkg-config libglib2.0-dev libpng12-dev libjpeg62-dev libgif-dev libX11-dev libfontconfig1-dev libfreetype6-dev bison gettext libtool

Build libgdiplus

Libgdiplus must be installed with support for png, jpg and gif. This is required by the default and custom themes. The commands above should install these libraries.

wget http://download.mono-project.com/sources/libgdiplus/libgdiplus-2.10.tar.bz2
tar xjvf libgdiplus-2.10.tar.bz2 > /dev/null
cd libgdiplus-2.10
./configure --prefix=/opt/mono-2.10.8
make > /dev/null
make install > /dev/null

Build mono

wget http://download.mono-project.com/sources/mono/mono-2.10.8.tar.bz2
tar xjvf mono-2.10.8.tar.bz2 > /dev/null
cd mono-2.10.8
./configure  --with-large-heap=yes --prefix=/opt/mono-2.10.8 --with-libgdiplus=/opt/mono-2.10.8 --with-moonlight=no
make > /dev/null
make install > /dev/null

Build mono-basic

wget http://download.mono-project.com/sources/mono-basic/mono-basic-2.10.tar.bz2
tar xjvf mono-basic-2.10.tar.bz2 > /dev/null
cd mono-basic-2.10
PATH=$PATH:/opt/mono-2.10.8/bin PKG_CONFIG_PATH=/opt/mono-2.10.8/lib/pkgconfig ./configure --prefix=/opt/mono-2.10.8
PATH=$PATH:/opt/mono-2.10.8/bin PKG_CONFIG_PATH=/opt/mono-2.10.8/lib/pkgconfig make > /dev/null
PATH=$PATH:/opt/mono-2.10.8/bin PKG_CONFIG_PATH=/opt/mono-2.10.8/lib/pkgconfig make install > /dev/null

Build xsp

wget http://download.mono-project.com/sources/xsp/xsp-2.10.2.tar.bz2
tar xjvf xsp-2.10.2.tar.bz2 > /dev/null
cd xsp-2.10.2
PATH=$PATH:/opt/mono-2.10.8/bin PKG_CONFIG_PATH=/opt/mono-2.10.8/lib/pkgconfig ./configure --prefix=/opt/mono-2.10.8
PATH=$PATH:/opt/mono-2.10.8/bin PKG_CONFIG_PATH=/opt/mono-2.10.8/lib/pkgconfig make > /dev/null
PATH=$PATH:/opt/mono-2.10.8/bin PKG_CONFIG_PATH=/opt/mono-2.10.8/lib/pkgconfig make install > /dev/null

Post Build Steps

  1. Download an updated browsercap.ini for improved browser recognition. Replace the existing file in /opt/mono-2.10.8/etc/mono browsers.garykeith.com Make sure you rename the file to browsercap.ini after downloading.
  2. Update the file /home/tcadmin/Monitor/mono-config with the path to your mono build.
  3. Restart the monitor and serviceman services:
cd /home/tcadmin/Monitor
./monitor-service restart
./serviceman-service restart
Retrieved from "https://help.tcadmin.com/index.php?title=Mono&oldid=777"